Here where you can display the sensors readings
Wind Tracker
The Wind Tracker wind speed and wind direction indicator offers big performance in a compact display.
Wind speed is displayed in your choice of units: KNOTS, MPH, KM/H, M/S. Maximum wind speed is also shown. Wind direction information is clearly displayed on a circular compass pattern of LEDs. Multicolored segments give a quick visual indication of current direction and variability. Front panel brightness control allows adjustment for best viewing in any light. A variety of inputs and outputs including 4-20 mA, Serial (RS-485), and Voltage are standard on the Wind Tracker. Alarms for both wind speed and wind direction are standard. The Wind Tracker is very compact for easy mounting on vertical bulkheads or wall surfaces.
For more information please refer to datasheet.
Wind_Tracker_Model_0620
Marine Wind Tracker
The Marine Wind Tracker has special features for shipboard use.
Wind speed is displayed in your choice of units: KNOTS, MPH, KM/H, M/S. Maximum wind speed is also shown. Wind direction information is clearly displayed on a circular pattern of LEDs. Bold front panel graphics give a quick indication of wind angle relative to vessel heading. Brightness control allows adjustment for best viewing in any light. Luminous front panel markings allow viewing even in a darkened pilothouse. 4-20 mA inputs, Serial NMEA, and Voltage outputs are standard on the Marine Wind Tracker. Alarms for both wind speed and wind direction are included. The Marine Wind Tracker is very compact for easy mounting on vertical bulkheads or consoles. Model 06260 Protective enclosure offers extra protection for wet or dusty locations.
For more information please refer to datasheet.
Marine_Wind_Tracker_Model_06206
Temp Tracker
The Temp Tracker is a versatile Temperature and Relative Humidity indicator with useful alarms and serial output.
Measured values are displayed on the front panel: temperature on the left, relative humidity or dewpoint on the right. Maximum and minimum values are saved and can be viewed at any time. The Temp Tracker includes the following useful features: fully-programmable alarms, calibrated voltage outputs, and RS-485 output. Input for the Temp Tracker is supplied by Model 41382LC2 Relative Humidity/ Temperature Probe which provides a convenient 4-20 mA current output signal for each channel. (Model 41003P Radiation Shield is suggested)
For more information please refer to datasheet.
Temp_Tracker_Model_46203
Meteorological Translator
The Model 26800 Meteorological Translator offers a unique and flexible solution for meteorological data measurement, recording and display.
Versatile design can be easily connected to wind, temperature, humidity, rainfall, pressure, solar radiation and most other sensors.
For more information please refer to datasheet.
Meteorological_Translator_Model_26800
